+ Larger Font | - Smaller Font
Machine tools - Vertical turning & boring mills, horizontal boring & milling machines, gantry    
a Yared Group Co.
English
cnc machine tools, vertical turning, boring mill, horizontal boring, milling, gantry, gantry mill
 Home >> Products >> Tire machinery >> OTR-Bom  Quick access: 

                                                             
PRESS DATA (OTR BOM)
Press load per mold position2,200,000 lbs.
Shield/Dome inside diameter87.5"
Daylight Opening42" max. - 24" min.
Max green tire height63"
Max internal pressure (with 100 psi in dome)400 psi with 81" O.D. Tire
Bead diameter range- standard32" - 46"
Center Mechanism - size and type7" or 95" Double Acting
Bead lift cylinder32.5" Lift
16" dia. x 18 stroke
Stripping force (theoretical @250 psi.)22,000 lbs. Max.
Recommended max top-half mold weight20,000 lbs. (segmented)
9,000 lbs. (standard)
Unloader - Model and TypeStripping Arms - Hydraulic
Unloading clearanceFront unload
Loader - Model and Type91" L-3 Hydraulic
Approximate bare press weight148,000 lbs.
TireholderNone
Opening or closing time92 seconds
Note: Side Plate Press:
  1. Single drive
  2. Access to maintenance of drive and lift cylinder
  3. Low operating height - segmented mold actuating cylinder inside of top link
  4. Stripping mechanism at rear of dome
  5. Crank gear with shrink fit throw trunnion
Due to the continuous research and improvement program, data presented is subject to change without notice.

Visits:
MSIE 4+, NS 6+, 800x600x16bit
©2004 Titan TMG